This wet do-it-yourself wrapping kit is a very cost effective way to clean welded-on dust from your entire collection of DSLR camera bodies. The versatility comes from the three included DUST-WAND's needed to clean any sensor aspect ratio, 1.6 (14mm), 1.3 (16mm) and 1.0 (18mm).

Price Comparison: Pre Made Swabs vs. Dust Aid Dust-Wand Kit (DWK)

Company A Pre Made Swabs & Liquid:
12 swabs:$42.95 x Liquid:$8.50=$4.28 per clean

Company B Pre Made Swabs & Liquid:
12 swabs:$39.95 x Liquid:$35.90=$6.32 per clean

DUST-WAND KIT:
50 wipes + wands + Liquid:$29.95 =$.60 per clean

It's easy to see the cost benefits of doing the wrap yourself with the Dust-Wand Kit. If you would calculate what it would cost to do 50 cleanings using the pre made swabs it would come out to around $178! That's some pretty serious cash savings.

When it comes to cleaning liquid evaporation speed, then there is non faster than ULTRA CLEAN™. This non-flammable and non-alcohol based liquid is one of the fastest dissolving liquids on the planet, which makes it virtually impossible for it to seep under the sensor filter frame.

Also included are small cloth clips that are used to hold the cleaning wipe in place. No more having to carry around a roll of tape to hold the wrap, now you can just throw on a clip and the cloth will stay in place.

With the kit comes DUST-CLOTHs™, Dust Aid's non woven wipes. There are 50 cloths per kit which come in a zip lock bag to keep them clean.

To round out the kit you will also receive a travel friendly hard plastic case which everything fits in.

What's Included:
1- DUST-WAND 1.6 (14mm)
1- DUST-WAND 1.3 (16mm)
1- DUST-WAND 1.0 (18mm)
1- ULTRA CLEAN Liquid
3- Cloth Clips
50- 4"x4" DUST-CLOTHs in a zip lock bag
1- Plastic Traveling Case